Hands Free Module Software changes

Материал из MMC Manuals
Перейти к навигации Перейти к поиску

↑ Audio: Software for Hands Free Module

Язык/Language: РусскийEnglish

Software Ver. Description Covered Vehicle Available date
  • Countermeasure to allow music to play via USB with Apple iOS8 and later devices.
  • Correction for unexpected pause of Bluetooth audio for Apple devices.
  • Fast Forward press issue fix.
  • New Gracenote Database.
  • Increased stability of Bluetooth connection.
  • Contents of software version 18.0.0.

Note: Music played via USB with iOS4 or older software, or iPod Classic/Nano, may not function properly.

All Fuse System vehicles July, 2015
  • Reduce the time for USB music to begin playing.
  • Simplify the pairing process using voice commands.
  • Contents of software version 11.0.0.
All Fuse System vehicles December, 2014
  • Countermeasure to allow music to play via USB when there are no play lists in the iPod/iPhone.
  • Contents of software version 9.0.0.

All Fuse System vehicles that have software version 9.0.0 or before. To check the software version, please see below.
If your software version is 10.0.0: Updating is not necessary because the content of 10.0.0 is the same as 11.0.0.

June, 2012
9.0.0 Allow USB audio connection for your iPod and iPhone with the iOS4. All 2010 and 2011 model year vehicles equipped with FUSE System. June, 2011

How to check the software version

Howto swversion.png

Approximately 1 minute after starting the engine, execute the following steps 1-3 within 10 seconds.

  1. Press and hold Phone icon.png (On hook key) for more than 2 seconds.
  2. Press and hold Phone icon.png (On hook key) for more than 2 seconds again.
  3. Press Phone icon.png (On hook key) for less than 1 second.
  4. Voice guidance will announce the software version number from the speaker.

Example : If the software version is 11.0.0, voice guidance announces "1", "1", "0", "0".

Note : If the software version is 9.0.0 or before, there will be no voice guidance.