Tool
|
Number
|
Name
|
Use
|
|
MB991955 A: MB991824 B: MB991827 C: MB991910 D: MB991911 E: MB991825 F: MB991826
|
M.U.T.-III sub assembly
A: Vehicle communication interface (V.C.I.) B: M.U.T.-III USB cable C: M.U.T.-III main harness A (Vehicles with CAN communication system) D: M.U.T.-III main harness B (Vehicles without CAN communication system) E: M.U.T.-III measurement adapter F: M.U.T.-III trigger harness
|
- Reading diagnosis code
- MPI system inspection
- Measurement of fuel pressure
caution |
For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
|
|
|
MB991987
|
Power plant ECU check harness
|
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
- Inspection of the engine-ECU or engine-A-M/T-ECU terminal voltage check
|
|
MB991348
|
Test harness set
|
- Measurement of voltage during troubleshooting
|
|
MB991709
|
Test harness
|
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
|
|
MB991658
|
Test harness
|
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
- Inspection of data list
- Inspection of oxygen sensor
|
|
MB991990
|
Quick connector
|
- Measurement of fuel pressure
|
|
MB992001
|
Hose adaptor
|
- Measurement of fuel pressure
- Checking the spray condition of injectors
|
|
MB991637
|
Fuel pressure gauge set
|
- Measurement of fuel pressure
|
|
MB991981
|
Fuel pressure gauge set
|
- Measurement of fuel pressure
|
|
MD998706
|
Injector test set
|
- Measurement of fuel pressure
- Checking the spray condition of injectors
|
|
MB991607
|
Injector test harness
|
- Checking the spray condition of injectors
|
|
MB991976
|
Injector test holder assembly
|
- Checking the spray condition of injectors
|