DIAGNOSIS PROCEDURE |
STEP 1. M.U.T.-III diagnosis code |
Q.
Is diagnosis code related with CAN communication displayed?
|
Inspection chart for diagnosis code (Refer to ). |
|
Go to Step 2 . |
|
STEP 2. M.U.T.-III other system diagnosis code |
|
Q.
Is the diagnosis code output?
|
Perform the troubleshooting of ASC (Refer to Group 35C -Troubleshooting -
Check Chart for Diagnosis Codes ). |
|
Replace the engine-ECU or engine-A-M/T-ECU then perform the variant coding (Refer to GROUP 00 -
Precautions Before Service -
How to Perform Variant Coding ). |
|