GEAR OIL CHANGE
18-21MY / ECLIPSE CROSS / Europe/Russia/Hong Kong/Singapore/Taiwan - Workshop Manual
27 -REAR AXLE > 27B-REAR AXLE<4WD> > ON-VEHICLE SERVICE > > GEAR OIL CHANGE
 
1. Remove the filler plug.
2. Remove the drain plug and drain oil.
3. Tighten the drain plug to the specified torque.
Tightening torque: 32 ± 2 N·m
 
4. Fill the oil until the level comes to the lower portion of the filler plug hole.
Specified gear oil: MITSUBISHI MOTORS GENUINE Super Hypoid Gear Oil API GL-5, SAE 80
Amount to use: approx. 0.4 L
5. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N·m
 





Yandex.Metrika
MMC-Manuals.ru