REMOVAL AND INSTALLATION <Vehicles with security alarm sensor>



Pre-removal operation
  • Removal of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly ) <RHD>
  • Removal of ASC-ECU harness connector (Refer to GROUP 35C- Hydraulic Unit ) <LHD>

Post-installation operation
  • Installation of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly ) <RHD>
  • Installation of ASC-ECU harness connector (Refer to GROUP 35C- Hydraulic Unit ) <LHD>





Removal Steps

>>A<<
1.
Security alarm siren assembly


2.
Security alarm siren bracket


3.
Security alarm siren


4.
Sub harness

INSTALLATION SERVICE POINT



>>A<< SECURITY ALARM SIREN BRACKET INSTALLATION



Use the earth bolts as the mounting bolts for security alarm siren bracket. The earth bolts have "E" mark on the bolt heads.





Yandex.Metrika
MMC-Manuals.ru