CODING LIST



caution With the ETACS functions being customised, if any of the ETACS-ECU variant coding and option coding items are changed, the customised contents are reset. In such case, the functions need to be recustomised.
Before troubleshooting, check that the coding data written into the engine-ECU, SRS-ECU and ETACS-ECU are normal. If they are not the same as the initial settings, various functions and systems do not work normally.

VARIANT CODING


The coding data can be checked by operating M.U.T.-III.

note For details on how to use the M.U.T.-III, refer to the "M.U.T.-III Owner’s manual."
1.Ensure that the ignition switch is at the "LOCK" (OFF) position.
2.Start up the personal computer.
3.Connect special tool V.C.I.-Lite USB cable (MB992747/MB992748) or M.U.T.-III USB cable (MB991827) to V.C.I.-Lite (MB992744) or V.C.I. (MB991824) and the personal computer.
4.Connect V.C.I.-Lite main harness A (MB992745) or M.U.T.-III main harness A (MB991910) to the V.C.I.-Lite or V.C.I.
5.Connect the V.C.I.-Lite main harness A or M.U.T.-III main harness A to the diagnosis connector of the vehicle.
note When the V.C.I.-Lite is connected to the diagnosis connector, the V.C.I.-Lite indicator lamp will be illuminated in a green colour.
6.Turn the V.C.I. power switch to the "ON" position. <When using the V.C.I.>
note When the V.C.I. is energised, the V.C.I. indicator lamp will be illuminated in a green colour.
7.Start the M.U.T.-III system on the personal computer and turn the ignition switch to the "ON" position.
8.On the system selection screen, select "MPI/GDI/DIESEL" to check the engine-ECU data, "SRS-AIR BAG" to check the SRS-ECU data, and "ETACS" to check the ETACS-ECU data.
9.Select "Coding."
10.Select "Coding Information & Copy."
11.If the displayed coding information is different from the corresponding initial setting in the list, replace the ECU with a correctly coded one. For replacement of the engine-ECU, refer to GROUP 13A - Engine-ECU <4B1>, GROUP 13B - Engine-ECU <4J1>. For replacement of the SRS-ECU, refer to GROUP 52B - SRS Control Unit . For replacement of the ETACS-ECU, refer to GROUP 54A - ETACS .

ENGINE ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
Vehicle Model
OUTLANDER
Model year
(Displays the model year)
Destination
EUR or EXP
Engine type
RA3/4B1 <4B11>
4A9/4B1 <4B12>
4B1/4J1 <4J12>
Final drive
2WD
4WD
Final gear ratio
5MT/6MT <5M/T>
6.026 <CVT>
Tyre circumference
2155mm
IMMOBILIZER
Present
Auto Stop & Go (AS&G)
Not present or Present
ABS
Not present or Present
A.S.C.
Not present or Present
EPS
Present
ECO indicator
Not present or Present
Adaptive cruise control
Not present or Present
ECO mode switch
Not present or Present
Power window Dr
Not present
Power window As
Not present
Power window RR
Not present
Power window RL
Not present
Power window RP
Not present
Sun roof
Not present or Present
M/T temperature sensor
Not present
Cruise control
Not present or Present
Speed limit function
Not present or Present
Cruise control option coding
Not accept
Speed limit function OP coding
Not accept
UMS control
Not present or Present
S/W variation
No.1

SRS-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
DR airbag squib(1st)
Present
PS airbag squib(1st)
Present
DR airbag squib(2nd)
Not present
PS airbag squib(2nd)
Not present
DR pretensioner squib
Present
PS pretensioner squib
Present
PS lap pretensioner squib
Not present or Present
RH side airbag squib
Not present or Present
LH side airbag squib
Not present or Present
RH curtain airbag squib
Not present or Present
LH curtain airbag squib
Not present or Present
DR knee airbag squib
Not present or Present
Occupant classification module
Not present
DR seat position sensor
Not present
Seatbelt warning indicator(CAN)
Not present
PS cut off SW
Not present or Present
DR buckle SW (mecha)
Not present
DR buckle SW (hall)
Not present
PS buckle SW (mecha)
Not present
PS buckle SW (hall)
Not present
Passenger’s SRS OFF lamp
Not present or Present
Passenger’s SRS ON lamp
Not present or Present
LH front G sensor
Present
RH front G sensor
Present
RH side sensor B-pillar
Not present or Present
LH side sensor B-pillar
Not present or Present
RH side sensor C-pillar
Not present
LH side sensor C-pillar
Not present
Roll over sensor
Not present
Disposal
Present
High volt.cutoff
Not present
Emergency call
Not present
2nd seat(RH) pretensioner squib
Not present
2nd seat(LH) pretensioner squib
Not present
Crash parameter flag(#0)
ON
Crash parameter flag(#1)
OFF
Crash parameter flag(#2)
OFF
Crash parameter flag(#3)
OFF
Crash parameter flag(#4)
OFF
Crash parameter flag(#5)
OFF
Crash parameter flag(#6)
OFF
Crash parameter flag(#7)
OFF

ETACS-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
Vehicle line
OUTLANDER
Model year
(Displays the model year)
Handle side
LHD or RHD
Destination
EUR or EXP
Transmission
5MT <5M/T>
CVT <CVT>
Engine type
4B11 D4 MIVEC <4B11>
4J11 SMART MIVEC <4J11>
4B12 D4 MIVEC <4B12>
4J12 SMART MIVEC <4J12>
Smart entry system
Not present or Type B
Keyless entry*2
Present
Immobilizer
Type A
WCM/KOS
Not present or Present
Panic Alarm*2
Disable
OSS
Not present or Present
KOS LF output
Type 3
KOS SW type(Gate/trunk)
Gate 2SW
Engine Type for OSS
Undefined or Gasoline or Diesel(MMC)
Transmission Type for OSS
Undefined
TPMS*1
Not present or Present(EUR)
TPMS information
N/A or 240 kPa
TPMS Off mode function
Not present or Present
AUDIO*2
Not present or Present
AND*2
Not present or Present
Destination for HFM
EUR or EXP
Entertainment Vehicle Line
OUTLANDER
Entertainment model year
(Displays the model year)
BSD LCA TYPE 1
Not present or Type 1
Radio Frequency*2
EUR or EXP
Number of speaker*2
Premium RF or 6 speakers
AUX equipment
Not Present or VTR adapter
KOS door entry type
Switch
Corner sensor control unit
Not present
CAMERA
Not present or Present
Rear view camera
Not present or Present
Nose view camera
Not present or Present
Left side view camera
Not present or Present
FCM function
Not present or Present
FCM type
Undefined or Type 2
ACC type
Undefined or Type 3
ACC
Not present or Present
ACC function
Not present or Present
Remote engine starter*2
NotPresent/ChgOk
IG key illumination
W/ getting off
Comfort flasher type
Present/Chg Ok
Trailer turn detection
Not present or Present
Front wiper*2
Speed Sensitive or Rain Sensitive
After wipe customize
Enable(def.D) or Enable(def.E)
Rear wiper mode
With Lo control
Rear wiper by reverse customize
Enable(d.FR/RR)
Auto fold mirror
SPD/Not present or Keyless/KOS
Manner switch*2
Not present/ChgNg
Auto lamp control*2
No/Chg Ng or Hi RLS/Chg Ng
Coming home lamp customize
Enable(def.E)
Welcome lamp customize
Enable(d.Small)
Room lamp delay timer/door & H/L
Short
Room lamp by H/L
Full or In dimming
Gate/Trunk lamp
Mode-2 (cargo)
Head lamp auto cut
Enable
Head lamp auto cut mode
B-spec
Door Unlock Mode Customize*2
Disable or Customize Enable
Door unlock by IG lock customize
Enable(def.D)
Key reminder unlock
Disable or A-spec/Dr only
Horn chirp by keyless
Not Present/ChgNg
Security alarm function
NotPresent/ChgNg or Present/Chg Ok or Present/Chg Ng
Security alarm mode
Not present or A-spec
Pre-alarm
Not present or Present
Security alarm sensor
Not present or Present
Security alarm siren
Not present or Present
Security sensor gain setting
Type 1 or Type 3 or Type 4
Siren answer
Disable
EV REMOTE-ECU*2
Not present
Security type(EV REMOTE)*2
Not Present
Security alarm(EV REMOTE)
Not present
Door control(EV REMOTE)
Not present
Panic Alarm control(EV REMOTE)
Not present
Position lamp control(EV REMOTE)
Not present
Head lamp control(EV REMOTE)
Not present
Horn control(EV REMOTE)
Not present
Battery reminder(EV REMOTE)
Not present
Battery charge(EV REMOTE)
Not present
Pre-A/C control(EV REMOTE)
Not present
Power window type
Type 1
Power window Dr
Present
Power window As
Not present
Power window RR
Not present
Power window RL
Not present
Multi mode RKE
Disable
Gate/Trunk
Gate type
RLS overwipe type
Type 2 or Type 8
RLS WS type
Type 2 (Green)
RLS*2
Not present or Present
RLS Communication Type
LIN
LDW equipment status
Not Present or Type C
LDW Parameter status
Not parameter or Type 2
LDW production setup status
Not Present
LDW
Not present
ORC
Present
DRL*1 type
DRL not present or Independent DRL
DRL function*2
NotPresent/ChgNg or Present/Chg Ng
Electric Slide door (Left)
Not present
Electric Slide door (Right)
Not present
Sun roof type
Not present or Type S2
Sun roof
Not present or Present
Rear S/R Unlock Output
Not present
ETG
Not present or Present
Head lamp
4 beams
Head lamp washer
Disable or Popup2 w/ washer
Fold mirror
Disable or Enable
Front fog lamp mode
B spec.
Front fog lamp*2
Not present or Present
Rear fog lamp*2
Present/ChgNg or NotPresent/ChgOk
Door lock system
B-Spec/exceptUSH or E-spec/exceptDLH
Gate/trunk opener mode
Present(Type 1)
Horn type*2
Dual horn
H/L leveling type
Not present or 2 height sensor
Head Lamp Leveling system type
OUTLANDER LED
Rear wiper
Enable
Wiper washer check valve*2
Present
Intelligent/Comfort washer custom
Enable(def.D) or Enable(def.E)
ESS by turn lamp
Not present or Present
Turn signal bulb
21W+21W+5W or 21/21/21/21/0.36
ESL
Not present or Present
Final drive
Front Drive <2WD>
4WD FF Base <4WD>
T/M oil cooler
Not present or Present(B)
S-AWC
Not present or Present
TCM
Not present or Present
Shift lock
Not present or Present
Transmission control type
Def./Not present or W/ AS&G
Average speed
Not available or Available
Coolant temp gauge threshold
Normal
Vehicle language status
English or Russian
Fuel consumption scale
L/100 km or MPG (UK)
Tyre circumference
2155mm
Frost warning threshold
EUR or EXP
Distance to empty
Available
Average fuel consumption
Available
Instant fuel consumption
Available or Not available
Seat belt reminder logic
EU or Except EU
Rear door type
HINGE
Shift Display Layout
LHD or RHD
Trip autoreset IG OFF
Available
GCC speed alarm indicator
Not present
AS&G status
Not present or Present
Gear shift reminder
Not present
Reverse alarm
Not available
Seat belt reminder control type
Non AABT
Charging Time Display
Not present
Seat belt reminder indicator
D&P independent
Key reminder
Not available
Brake vacuum warning
Not present
GCC speed alarm
Not available
Rear radar & control
Not present or Present
Rent-a-car mode IG-OFF always
Available
S-AWC Control display
Not available
Service reminder schedule table
Normal
Display opening type
MMC
Language mode
Available
Fuel tank type
Type 0 or Type 1
GSI system
Not present or Present
Launch gear block alarm
Not present
Service reminder for month
12 month or 6 month
Service reminder for km
20000km or 10000 km
Service reminder for mile
12500mile or 6000 mile
Drive mode
Not present or Present
A/C control type
EUR or Normal
ECO gauge
Not present or Present
ECO score
Not present or Present
Electric motor switch reminder
Not present
Gate/Trunk
Gate type
Steering Wheel Switch
Present
Distance to empty(PHEV)
Not present
Energy Flow
Not present
EV ratio
Not present
Outside temperature
Present
ECO SW(Except for PHEV)
Not present or Present
OCM
Not present
A/C
Present
Indirect lamp
Not present
Room lamp center switch
Not present
Compressor type*2
Type 2
Temperature type
Celsius
Option Heater
No present
Indirect lamp type
Type1/No present
RCTA type 2
Type 1
Heater Control Panel Type
Dual LCD
EPS
Present
EPS type
Type 4
ABS
Not present or Present
Vehicle Type for A.S.C.
Not present or Type 6
Brake Type for A.S.C.
Not present or Type 1 or Type 2 or Type 3
HBA Type
Not present or Type 1
ABS Type
Not present or Type 2
TCL Type
Not present or Type 1 or Type 11 or Type 12
A.S.C. Type
Not present or Type 1 or Type 2
A.S.C.
Not present or Present
HSA Type
Not present or Type 1 or Type 3
AS&G brake hold Type
Not present or Type 2
Brake prefill
Not present or Present
Brake fade support
Not present
S-AWC Brake
Not present or Present
Enhanced TCL
Not present
TSA Type
Not present
ACC Type for A.S.C.
Not present or Type 6 or Type 8
FCM Type for A.S.C.
Not present
Engine power
Normal
RCTA type 3
Type 1 or Type 2
Fuel filter warning
Not present
Cooling fan
Relay control
Auto Stop & Go (AS&G)
Not present or Present
RCTA type 4
Type 1 or Type 2
EV
Not present
RCTA type 5
Type 1 or Type 2
Gate auto OPN by HD SW customize
Disable or Enable(def.E)
ETG Buzzer
Type A
ETG Answerback
Not present
TP STAT
Type 2
TRCP
Disable
Battery heater type
Not present
Automatic High Beam
Not present or Present
BSD LCA TYPE 2
Not present or Type 1
SONAR data
Not parameter or Type 1 or Type 2
UMS type
Not present or Type A or Type B
Corner sensor type*2
Not present or Type A or Type C
BSW type
Not present or Type A
Heated windshield
Not present or Present
SONAR
Not present or Present
Camera display type
Undefined or Type 3 or Type 4 or Type 6 or Type 8
Predictive guideline
Type 2 or Type 3
Front camera position
Undefined
Automatic High Beam type
Not present or Type 5 or Type 6
FCM camera
Not present or Present
FCM function 2
Not present or Present
FCM type 2
Undefined or Type 25 or Type 26
Fuel type 1 for e-Call
Present
Fuel type 2 for e-Call
Not present
Fuel type 3 for e-Call
Not present
Fuel type 4 for e-Call
Not present
Fuel type 5 for e-Call
Not present
Fuel type 6 for e-Call
Not present
Fuel type 7 for e-Call
Not present
Fuel type 8 for e-Call
Not present
Sound type for e-Call
Type 4
Turn-by-Turn Status
Not present or Present
Destination for SDA
Other or EU or RUSSIA
Destination for e-Call
Not EU/RUSSIA or EU or RUSSIA
HDC type
Not present
Brake auto hold
Not present or Present
EPB
Not present or Present
RCTA type 6
Type 1 or Type 2
Acceleration type for A.S.C.
Not present or Type 1
Auto release type for EPB
Not present or Type 4 or Type 6
Brake type for EPB
Not present or Type 2
Dynamic brake type
Not present or Type 1
RCTA type 1
Not present or Type 1
FCM Type 2 for A.S.C.
Not present or Type 1 or Type 3
e-Call
Not present
Charge amount customization
Disable
GATEWAY
Not present or Present
note
  • *1 : TPMS is an abbreviation of Tyre Pressure Monitoring System, DRL of Daytime Running Lamp.
  • *2 : The setting can be changed by the option coding. Refer to .

OPTION CODING


caution
  • If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
  • With the ETACS functions being customised, if any of the ETACS-ECU option coding items are changed, the customised contents are reset. In such case, the functions need to be recustomised.
The ETACS-ECU option coding data can be checked or changed by operating M.U.T.-III.



LIST <ETACS-ECU>
Item name
Auto lamp control
Keyless entry
AUDIO
RLS
Number of speaker
Radio Frequency
Front fog lamp
Rear fog lamp
Horn type
Manner Switch
Remote engine starter
AND
Compressor type
DRL function
Wiper washer check valve
ESS Cancel Function
EV REMOTE-ECU
Security type(EV REMOTE)
Panic Alarm
Door Unlock Mode Customize
Front wiper
Corner sensor control unit
Corner sensor type




Yandex.Metrika
MMC-Manuals.ru