PROPELLER SHAFT UNIVERSAL JOINT CHECK




PROPELLER SHAFT VISUAL CHECK


1.Place the gearshift lever to the "N" (neutral position) <M/T> or the selector lever to the "N" position <A/T>.
2.Then place the transfer shift lever to the "2WD" position. <4WD>
3.Check the propeller shaft for dent, damage or crack.


4.Check the propeller shaft universal joint, oil seal for crack or damage. If abnormality is recognised, replace the universal joint with a new one.

PROPELLER SHAFT UNIVERSAL JOINT PLAY CHECK


1.Place the gearshift lever to the "N" (neutral position) <M/T> or the selector lever to the "N" position <A/T>.
2.Then place the transfer shift lever to the "2WD" position. <4WD>

3.Hold the tube of propeller shaft by one hand, and apply force by the other hand to the flange yoke or sleeve yoke in rotating direction, axial direction, and perpendicular direction for checking looseness. If looseness is recognised, replace the universal joint with a new one.





Yandex.Metrika
MMC-Manuals.ru