REMOVAL AND INSTALLATION



caution When the FCM-ECU is removed and installed/replaced, calibrate the radar (refer to ).
Pre-removal Operation
  • Radiator grille assembly removal (Refer to GROUP 51, Radiator Grille .)

Post-installation Operation
  • Radiator grille assembly installation (Refer to GROUP 51, Radiator Grille .)
  • FCM-ECU (radar) calibration (Refer to .)





Removal steps


1.
FCM-ECU sub harness
<<A>>

2.
Clip


3.
FCM-ECU

REMOVAL SERVICE POINT



<<A>> CLIP REMOVAL



Remove the clips from the bracket by twisting them in the arrow direction.





Yandex.Metrika
MMC-Manuals.ru