)
| 1.Remove the luggage compartment floor carpet. |
|
2.Remove the electric motor unit inspection lid. |
) |
3.According to either of the procedures below, pressurise the cooling system. (1) When the special tool radiator cap tester is not used .....1. Start the "Coolant refilling control" (refer to Coolant Refilling  ).(2) When the special tool radiator cap tester is used .....1. Use the special tool below.
4.Check for any coolant leak from the radiator, water pump, radiator hose, device connecting hoses, and others. 5.Install the electric motor unit inspection lid. 6.Install the luggage compartment floor carpet. |
