|
1.Operate the selector lever to each of the ranges, and measure the resistance value of shift position switch (main).
Item
|
Terminal number
|
Normal state resistance value
|
P
|
3 - 4
|
Continuity exists (2 Ω or less)
|
R
|
4 - 7
|
N
|
2 - 4
|
D
|
4 - 6
|
B
|
1 - 4
|
C
|
4 - 5
|
2.
| caution |
After the replacement of shift position switch (main), be sure to adjust the shift position switch.(Refer to  .)
|
If not within the standard value, replace the shift position switch (main).
3.Using the same procedure, measure the resistance value of shift position switch (sub).
4.
| caution |
After the replacement of shift position switch (sub), be sure to adjust the shift position switch.(Refer to .)
|
If not within the standard value, replace the shift position switch (sub).
|
)
