)
Limit value: 20 N or less
3.If the sliding torque exceeds the limit value, loosen the lock nut once, and then retighten to the specified torque. Then, check the sliding torque again.
Tightening torque: 144 to 176 N·m
| 1.Rotate the hub to condition the bearing. |
|
2.Wind a rope around the hub bolts. Using a spring scale, pull the rope to the perpendicular direction to rotate the hub, and measure if the sliding torque is within the limit value. Limit value: 20 N or less 3.If the sliding torque exceeds the limit value, loosen the lock nut once, and then retighten to the specified torque. Then, check the sliding torque again. Tightening torque: 144 to 176 N·m |
