REAR WHEEL ALIGNMENT CHECK AND ADJUSTMENT



  1. The rear suspension, wheel and tires must be serviced to normal condition before measuring the wheel alignment.
  2. Measure the wheel alignment with the vehicle parked on a level surface.

TOE-IN
Standard value:

    At the centre of tyre tread: 0 ± 3 mm
    Toe angle (per wheel): -0°09’ to +0°09’

CAMBER
Standard value: 0° 00’ ± 30’ (difference between right and left wheels must be 0°30’ or less)

As for vehicles with aluminium wheel, use a compensator to measure the camber.




Yandex.Metrika
MMC-Manuals.ru