REMOVAL AND INSTALLATION


Pre-removal OperationBrake fluid draining
 Post-installation operation
  • Brake fluid refilling and air bleeding (Refer to ).
  • Brake disc runout inspection/correction (Refer to .)




Removal steps


1.
 Brake hose connection


2.
 Gasket


3.
 Front brake caliper assembly
<<A>>
4.
 Brake disc

REMOVAL SERVICE POINTS

<<A>> BRAKE DISC REMOVAL

If the brake disc removal is difficult, install bolts (M8 x 1.25 mm) shown in the figure, and tighten them evenly and gradually to remove the brake disc.




Yandex.Metrika
MMC-Manuals.ru