)
- a: MB991824
b: MB991827
c: MB991910
d: MB991911
e: MB991825
f: MB991826
- a: Vehicle communication interface (V. C. I.)
b: M.U.T.-III USB cable
c: M.U.T.-III main harness A (Vehicles with CAN communication system)
d: M.U.T.-III main harness B (Vehicles without CAN communication system)
e: M.U.T.-III measurement adapter
f: M.U.T.-III trigger harness
| caution | For vehicles with CAN communication, use the M.U.T.-III main harness A to send simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly. |
)
- a: MB991219
b: MB991220
c: MB991221
d: MB991222
- a: Check harness
b: LED harness
c: LED harness adapter
d: Probe
- For checking connector pin contact pressure
- For checking power supply circuit
- For checking power supply circuit
- For connecting a locally sourced tester
)
| note | Conventional steering linkage puller MB991406, MB990635, or MB991113 can also be used. |
)
)
)
)
)
)
