|
|
1.Position the front wheels in a straight ahead direction.
|
|
|
2.Measure the circumferential steering wheel play until the front wheels actually start operating while turning the steering wheel slightly in the left and right directions.
Limit value: 30 mm or less
|
|
|
3.If the steering wheel play exceeds the limit value, check the steering shaft joint or steering linkage for looseness, and replace or repair the faulty components if necessary.
|
|
|
4.If the play still exceeds the specification after inspecting item 3, inspect the steering gear & linkage assembly, and replace as necessary.(Refer to  .)
|
