Tool
|
Number
|
Name
|
Use
|
|
MB990480
|
Window glass holder
|
Removal of power window regulator and motor assembly
|
|
MB990900orMB991164
|
Door hinge adjusting wrench
|
Door adjustment
|
|
MB990925
- MB990939
|
Bearing and oil seal installer set
- Remover bar
|
Door striker adjustment
|
|
MB990211
|
Sliding hammer
|
|
MB990241
- MB990243
|
Axle shaft puller
- Body puller
|
|
MB991955
- MB991824
- MB991827
- MB991910
- MB991911
- MB991825
- MB991826
|
M.U.T.-III sub-assembly
- Vehicle Communication Interface (V.C.I.)
- M.U.T.-III USB cable
- M.U.T.-III main harness A (Vehicles with CAN communication system)
- M.U.T.-III main harness B (Vehicles without CAN communication system)
- M.U.T.-III measure adapter
- M.U.T.-III trigger harness
|
| caution |
For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
|
ETACS-ECU check (Diagnosis code, service data)
|
|
MB991223
- MB991219
- MB991220
- MB991221
- MB991222
|
Harness set
- Check harness
- LED harness
- LED harness adapter
- Probe
|
Continuity check and voltage measurement at harness wire or connector
- For checking connector pin contact pressure
- For checking power supply circuit
- For checking power supply circuit
- For connecting a locally sourced tester
|
|
MB992006
|
Extra fine probe
|
Continuity check and voltage measurement at harness wire or connector
|
)
)
)
)
)
)
)
)
