REMOVAL AND INSTALLATION


Pre-removal Operation
  • Door trim assembly removal (Refer to GROUP 52A - Door Trim .)

 Post-installation operation
  • Door outside handle play check (Refer to .)
  • Door inside handle play check (Refer to .)
  • Door trim assembly installation (Refer to GROUP 52A - Door Trim .)





Door inside handle removal

>>B<<
 1.
 Door inside handle



Door outside handle removal steps


·
 Waterproof film, Inner core (Refer to .)


2.
 Door outside handle



Door lock key cylinder (both side <LHD>, driver’s side <RHD>) removal steps


·
 Waterproof film (Refer to .)


3.
 Retainer


4.
 Door lock key cylinder



Door latch assembly removal steps


·
 Rear lower sash (Refer to .)


5.
 Screw


6.
 Door latch assembly


7.
 Door latch cover


8.
 Inside lock cable


9.
 Inside handle cable


10.
 Outside handle rod


11.
 Front door outside lock rod


12.
 Front door panel bracket



Door check removal steps


·
 Waterproof film (Refer to .)

>>A<<
 13.
 Door check





Door inside handle removal

>>B<<
 1.
 Door inside handle



Door outside handle removal steps


·
 Waterproof film (Refer to .)


2.
 Door outside handle



Door handle and door latch removal steps


3.
 Screw


4.
 Door latch assembly


5.
 Door latch cover


6.
 Inside lock cable


7.
 Inside handle cable


8.
 Outside handle rod



Door check removal steps


·
 Waterproof film (Refer to .)

>>A<<
 9.
 Door check

INSTALLATION SERVICE POINTS

>>A<< DOOR CHECK INSTALLATION

Install the door check with the following identification marks facing upward.
Application
 Identification mark
Front door
 Left side
 30L
Right side
 30R
Rear door
 Left side
 24L
Right side
 24R

>>B<< DOOR INSIDE HANDLE INSTALLATION
When connecting the inside cable to the door inside handle, ensure that the door latch and the inside handle are unlocked.




Yandex.Metrika
MMC-Manuals.ru