CHECK THE POWER SWITCH- LIKED FOLD AND UNFOLDING FUNCTION OF THE OUTSIDE REAR-VIEW MIRRORS
1.When the ignition switch is turned on with the driver’s door closed and the door mirrors folded, the mirrors should be unfolded. When the power switch is turned off and the driver’s door is opened with the mirrors unfolded, they should be folded. 2.If not, carry out the troubleshooting (Refer to ).
note
The electric folding outside rear-view mirrors are set to the vehicle speed-dependent unfolding as default setting. Prior to this check, confirm whether the ipower switch-linked function is enabled or not (Refer to ).
