When an abnormal odometer information is stored in the combination meter, diagnosis code No. B1200 will be set.
PROBABLE CAUSE
Malfunction of combination meter
DIAGNOSIS PROCEDURE
M.U.T.-III diagnosis code
Check if diagnosis code is set to the combination meter.
(1)Erase the diagnosis code.
(2)Turn the electric motor switch from "LOCK" (OFF) position to "ON" position.
(3)Check if diagnosis code is set.
Q.
Is the diagnosis code set?
Replace the combination meter.
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Replace the combination meter.
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction 