|
|
1.Connect M.U.T.-III to the diagnosis connector (16 pin).
|
|
|
2.Start the M.U.T.-III system on the PC and turn the electric motor switch to the "ON" position.
|
|
|
3.Select "Meter" on the "System Select" screen, and press the "OK" button.
|
|
|
4.Select "Special Function" on the next screen.
|
|
|
5.Select "Service Reminder" on the "Special function" screen.
|
|
6.Select the function to be executed from "Function List."
- 1 Reminder reset (Indicator off) (Refer to
 .)
- 2 Next schedule reminder cancel (Refer to .)
- 3 Extra reminder setting (Refer to .)
- 4 Extra reminder cancel (Refer to .)
- 5 Periodic reminder schedule set (Refer to .)
- 6 Integrated value adjustment (Refer to .)
- 7 Optional INT schedule setting (Refer to .)
|
|
|
The service reminder warning indicator which is currently output can be cancelled.
|
|
1.On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)."
| note |
The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 km" and "0 month."
|
2.Press the "OK" button.
|
|
3.The current warning indicator is cancelled, and the next warning period is displayed.
| note |
The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "15000 km" and "12 month."
|
|
|
|
The next warning period is cancelled, and its following warning period can be set.
|
|
1.On the "Service Reminder" screen, select "2 Next schedule reminder cancel."
| note |
The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "1000 km" and "1 month."
|
2.Press the "OK" button.
|
|
3.The next warning period is reset, and its following warning period is set.
| note |
The screen indicates that the warning period (Nos. 1 and 2 in the data list) is changed to "16000 km" and "13 month."
|
|
|
|
In addition to the current warning period, the temporary service reminder warning period can be set.
|
|
1.On the "Service Reminder" screen, select "3 Extra reminder setting."
| note |
The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has not been set.
|
|
|
2.Set the temporary warning period (distance or month) of the "Set value."
| note |
Either input of distance or month can execute the setting.
|
3.Press the "OK" button.
|
|
4.The temporary warning period is set.
| note |
The screen indicates that "2 month" has been added to the temporary warning period (No. 5 in the data list). (The distance of No. 4 in the data list has not been set.)
|
|
|
|
The temporary service reminder warning period which has been set can be cancelled.
|
|
1.On the "Service Reminder" screen, select "4 Extra reminder cancel."
| note |
The screen indicates that "3000 km" and "2 month" have been set to the temporary warning period (Nos. 4 and 5 in the data list).
|
2.Press the "OK" button.
|
|
3.The temporary warning period is cancelled.
| note |
The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has been cancelled.
|
|
|
|
The service reminder schedule can be changed.
|
|
1.On the "Service Reminder" screen, select "5 Periodic reminder schedule set."
| note |
The screen indicates that the current schedule (No. 7 in the data list) has been set to "EU 1."
|
|
|
2.Set the schedule to be changed from "Set value."
3.Press the "OK" button.
|
|
4.The schedule is changed.
| note |
The screen indicates that the current schedule (No. 7 in the data list) has been changed to "EU 2."
|
|
|
|
At the combination meter replacement or for the vehicle with its battery being removed for a long period (15 days or more), this adjustment is used to reset the mileage and elapsed days for check warning.
|
|
1.On the "Service Reminder" screen, select "6 Integrated value adjustment."
| note |
The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) are "26 km" and "0 day."
|
|
|
2.To "Set value," input the mileage and elapsed days to be reset.
| note |
Always input both the mileage and elapsed days.
|
3.Press the "OK" button.
|
|
4.The mileage and elapsed days are changed. The combination meter automatically recalculates the distance and days to the nearest next check from the settings of mileage and elapsed days for check warning, and then displays them in "Data List."
| note |
- The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) have been changed to "100 km" and "30 day."
- Set the elapsed days for check warning to "0 day" by the above resetting method, thereby the timer is reset indirectly.
|
|
|
|
In addition to the existing schedule, the optional service reminder schedule can be set.
|
|
1.On the "Service Reminder" screen, select "7 Optional INT schedule setting."
| note |
The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.
|
|
|
2.Set the optional schedule (distance or month) of the "Set value."
| note |
Either input of distance or month can execute the setting.
|
3.Press the "OK" button.
|
|
4.The optional schedule is set. The set schedule becomes effective by executing "5 Periodic reminder schedule set" and setting the schedule to "Optional INT."
| note |
The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set.)
|
|
|
|
1.Move the electric motor switch to the OFF position.
|
|
|
2.Operate the selection button to display warning period on the odometer.
|
|
|
3.Press the selection button once for at least 1.2 seconds.
|
|
4.The service reminder indicator flashes.
5.Press the selection button three times for at least 1.2 seconds while the service reminder indicator is flashing (for ca. 10 seconds).
6.The service reminder indicator is turned ON, and the current schedule is displayed on the odometer.
7.While the current schedule is displayed (for three seconds), press the selection button consecutively three times for less than 1.2 seconds.
8.The odometer is shifted to the schedule selection mode.
9.When the selection button is pressed for less than 1.2 seconds, the schedule is shifted, and when the button is pressed for 1.2 seconds or more, the displayed schedule is set.
10.The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.
|
Schedule
|
Warning type
|
Warning criteria
|
EU 1 (initial condition)
|
Elapsed time (month)
|
Every 12 elapsed month
|
Driving distance (miles)
|
Every 9,000 miles of driving distance
|
Driving distance (km)
|
Every 15,000 km of driving distance
|
EU 2
|
Elapsed time (month)
|
Every 12 elapsed month
|
Driving distance (miles)
|
Every 12,500 miles of driving distance
|
Driving distance (km)
|
Every 20,000 km of driving distance
|
Optional INT
|
The optional schedule can be set. (Only M.U.T.-III can be set.)
|
OFF Display
|
Without function. "OFF" is displayed on the odometer/tripmeter.
|
Function OFF
|
Without function (Only M.U.T.-III can be set.)
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
