REPLACE THE BULB


caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

FRONT FOG LAMP BULB REPLACEMENT
1.Remove the front fog lamp assembly. (Refer to .)

2.Disconnect the connector and withdraw the bulb.
3.After replacing the bulb, securely connect the connector, and install the front fog lamp assembly.

REAR FOG LAMP BULB REPLACEMENT
1.Remove the rear fog lamp assembly. (Refer to .)

2.Disconnect the connector and withdraw the bulb.
3.After replacing the bulb, securely connect the connector, and install the rear fog lamp assembly.




Yandex.Metrika
MMC-Manuals.ru