)
2.Press the following buttons in that order within sixty seconds from step (1).
(1) CD/TRACK DOWN button
(2) SEEK DOWN button
(3) SEEK UP button
(4) CD/TRACK UP button
HOW TO START SPEAKER CONNECTION CHECK MODE |
| Enter the speaker connection check mode according to the following steps: |
|
1.Turn the electric motor switch to the "ACC" or "ON" position and switch off the radio and CD player. 2.Press the following buttons in that order within sixty seconds from step (1). (1) CD/TRACK DOWN button (2) SEEK DOWN button (3) SEEK UP button (4) CD/TRACK UP button |
SPEAKER CONNECTION CHECK MODE |
| With the speaker connection check mode, the connection status of each speaker can be checked based on the sound output from each speaker. The procedure is as follows. |
) |
1.At the same time with the start of speaker check mode, the sound for speaker connection check is output from the front door speaker (LH) and tweeter (LH). 2.Press the CD/TRACK UP button to switch the sound output for speaker connection check from the front door speaker (RH) to the tweeter (RH). |
