Code No. P0605: ROM error
DIAGNOSIS CODE SET CONDITIONS
- If a checksum error of the ROM data or a data loading error is detected, the diagnosis code No. P0605 will be set.
PROBABLE CAUSES
- Malfunction of the EV-ECU
|
|
STEP 1. Diagnosis code recheck
|
|
|
Check again if the diagnosis code is set to the EV-ECU.
|
|
|
(1)Erase the stored diagnosis code.
|
|
|
(2)Set the electric motor switch from the LOCK (OFF) position to the ON position.
|
|
|
(3)Check if the diagnosis code is set.
|
|
|
Q.
Is the diagnosis code set?
|
|
|
 Replace the EV-ECU. (Refer to  .) Then go to Step 2.
|
|
|
|
|
|
 Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction .)
|
|
|
|
|
|
STEP 2. Diagnosis code recheck
|
|
|
Check again if the diagnosis code is set to the EV-ECU.
|
|
|
(1)Erase the stored diagnosis code.
|
|
|
(2)Set the electric motor switch from the LOCK (OFF) position to the ON position.
|
|
|
(3)Check if the diagnosis code is set.
|
|
|
Q.
Is the diagnosis code set?
|
|
|
Return to Step 1.
|
|
|
|
|
|
The diagnosis is complete.
|
|
|
|
MMC-Manuals.ru