CHECK ON SERVICE PLUG SWITCH



 1.Disconnect the connector "A" and the connector "B" of the main battery.
danger When pulling service plugs, wear the specified protective equipment (Refer to ).

2.Measure the resistance between the main battery connector "A" terminal No. 4 and the main battery connector "B" terminal No. 4.
Service plug status
 Normal condition
Inserted service plug
 Continuity (2 Ω or less)
Disconnected service plug
 No continuity
3.If abnormal, the main battery must be replaced.




Yandex.Metrika
MMC-Manuals.ru