|
|
Before troubleshooting the on board charger/DC-DC converter, check that the diagnosis
code is output to the EV-ECU. If the EV-ECU outputs the diagnosis code, troubleshoot the output diagnosis
code.
|
|
|
After troubleshooting the on board charger/DC-DC converter, check that the diagnosis code
regarding the BMU is not output to the EV-ECU. If the diagnosis code is output, delete the diagnosis
code.
|
|
|
Troubleshoot the on board charger/DC-DC converter according to the troubleshooting procedures.
(Refer to GROUP 00 - Troubleshooting/Inspection Service Points - Contents
of Troubleshooting  ).
|
