Inspection Procedure 11: Charging time is longer than usual, or charging does not stop.




COMMENTS ON TROUBLE SYMPTOM



  • The cause is assumed to be low environment temperature at charging.

PROBABLE CAUSES



  • Use of an extension cable
  • Malfunction of the domestic power supply facility
  • Simultaneous use with other electric products in the home

DIAGNOSIS PROCEDURE


STEP 1. ?Check whether the diagnosis code is set.


Check if the diagnosis code is set to the on board charger.

Q. Is the diagnosis code set?

Carry out the troubleshooting for the relevant diagnosis code. (Refer to .)
Go to Step 2.

STEP 2. Check the trouble symptom.


Q. Is the check result normal?

Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction .)
Check the domestic power supply facility.





Yandex.Metrika
MMC-Manuals.ru