Code No. 41: Input Current Sensor 0 Point Abnormal

TROUBLE JUDGMENT

Check Conditions

The on board charger control power supply voltage is more than 8 V.
While the on board charger is allowed to be charged from the EV-ECU.

Judgement Criterion

Input current sensor is less than -1.5 A or more than 1.5 A.

FAIL-SAFE AND BACKUP FUNCTION

The charge is stopped.

PROBABLE CAUSE

The on board charger is failed.

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III diagnosis code

Q. Is the diagnosis code set?

	Replace the on board charger/DC-DC converter.

	Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).